Jul 042013
 

We know that heat is a form of energy which flows from a hotter body to a colder body. It is the energy produced due to the total kinetic energy produced by the vibrating molecules of a body. We can provide heat to a system either by performing mechanical work on the system or by supplying heat to that system . Let us consider that we have an ideal gas in a cylindrical container which is fitted with a piston (figure 1). Let’s suppose that the piston is fixed in its position and the walls of the cylinder are kept at a temperature higher than that of the gas. Then the gas molecules hit the wall and rebound. The average kinetic energy of a wall molecule is larger than the average kinetic energy of a gas molecule. Therefore, on collision, wall molecules provide energy to the gas molecules. Then the other gas molecules share the kinetic energy and hence the total internal energy of the gas increases.

figure 1

Next, let us consider the same initial condition but now let us suppose that the walls are at the same temperature as the gas. Then, suppose the piston is pushed slowly in order to compress the gas. After that, the speed of the gas molecule increases after collision with the piston coming towards it We can assume that elastic collision, v2 = v1 + 2u in figure 1. Hence, as the piston is pushed in, the internal energy of the molecules increases.

figure 2

We can see that the total internal energy of the gas may be increased due to the difference in temperature between the gas and the walls (heat transfer) or due to the motion of the piston (work done on the gas).

In a general condition, both modes of energy transfer may take place. For example, let us consider that a gas is kept in a cylindrical can which is fitted with a movable piston. If the cylindrical can is kept on a hot stove, heat is supplied by the hot bottom side to the gas and the piston is pushed out to some extent. As the piston moves outwards, work is done by the gas on it and the begins to lose energy. Thus, when heat is provided to the gas, the gas gains energy and when work is done by it, it loses energy.

Suppose, in a process, ΔQ amount of heat is provided to the gas and ΔW amount of work is done by it. The total energy of the gas must increase by ΔQ – ΔW. Due to this, the gas along with its container may start moving in systematic motion or the internal energy of the gas may increase. If the energy does not appear as a systematic motion of the gas then this net energy ΔQ – ΔW must go in the form of its internal energy. Here, if we denote the change in internal energy by using ΔU, we get,

ΔU = ΔQ – ΔW
or, ΔQ = ΔU + ΔW …… (i)

The above equation (i) is the statement of the first law of thermodynamics. In an ideal monoatomic gas, the translational kinetic energy of all its molecules is the factor which creates the internal energy in the gas. In simple words, the internal energy may be contributed by the kinetic energy of the molecules produced by their vibration, by the potential energy corresponding to the molecular forces or the rotational kinetic energy of the molecules. The equation (i) represents a statement of conservation of energy and is usable in any system.


Jul 042013
 

SLC Model Question Set 1 (HPE)

Full Marks: 75
Pass Marks: 24

Group ‘A’
Very Short Answers Questions.
Attempt all the questions from this group. 10×1=10

1. Define population density. Write the formula to calculate it.
2. Write down any two primary sources of population data.
3. List out any two indicators of Human Development Index.
4. Which aspect of ecosystem is represented by topography, altitude, climate, etc?
5. Which region of Nepal is more influenced by modernization? Why? Give reason.
6. What is called the action of conserving the plants and animals in their own original natural habitat?
7. At what altitude of Nepal is Spikenard found? Which part of this plant is used for medicinal purpose?
8. When and why was the Brundtland Commission formed?
9. Write the causative agents of the disease ‘Syphilis’ and ‘Gonorrhea’.
10. What type of hospital is it called if it is equipped with fifty to hundred fifty beds? Which is the most appropriate form of health service in the context of Nepal?

Group ‘B’
Short Answer Questions: (Any 13 only): 13×5=65

11. Define census. Differentiate between De-Facto Method and De-Jure Method of conducting census.
12. In a certain town of Nepal, the population of Baishakh 1st was 40,000, which increased to 60,000 by the end of the year. In the same year, 2,700 babies were born and 1,200 people died. On the basis of the above data calculate Mid-year population, CBR and CDR.
13. Describe in brief any five biological factors that affect birth.
14. What is quality of life? Write any four elements of quality of life and explain any one of them.
15. Compare the socio-economic aspects of Mountain region and Terai region of Nepal in terms of any five meaningful points.
16. Explain in brief any five effects on the Eco-system of hilly region produced by human activities with their corrective measures.
17. Write any six importance bio-diversity and explain any one.
18. Write short notes on:
a) Yarshagumba                     b) Ex-situ conservation

19. What is meant by sustainable development? Discuss any four principles of sustainable development in short.
20. What are infrastructures of development? Mention the types of infrastructure. Also write any four things to be considered while developing human resources.
21. What is meant by food and water borne disease? Name nay four such diseases and also write any six common measures to prevent them.
22. “Drug is a social evil”. Justify this statement with example.
23. Many people in Nepal have set a culture of drinking alcohol. Write any two reasons for attraction of people towards drinking alcohol. Also write any four immediate effects and four long-term effects of excessive and prolonged alcoholism.
24. “Lack of health education is a major health problem being encountered in Nepal.” Clarify the statement.
25. When was Family Planning Association of Nepal established? Describe in shor the services and programmes rendered by FPAN.




CLICK HERE for Main Page..:::..CLICK HERE for Next Set

 Posted by at 8:58 am